Troubleshooting
      Back to home
      1. Help Center
      2. Maintenance & Troubleshooting
      3. Troubleshooting

      Whiz is not detecting steps

      Whiz comes with cliff sensors to ensure it can operate safely around cliffs or steps. If Whiz is not detecting a cliff or ledge, lay the machine down slowly and clean the cliff sensor with a microfiber cloth. If this issue persists, reboot the machine using the following steps:

       

      1. Turn the Power off
      2. Remove the Battery from the machine
      3. Wait for 30 seconds with the Battery removed
      4. Insert the Battery
      5. Turn the Power on

       

      Download a copy of the Frequently Asked Questions